The extremely robust design means that these electrical heating units can be used for a multitude of applications in the professional sector and their durability is ensured.

Compact Heaters

Mobile compact heating units

TROTEC TDS series

Highly versatile electrical heating units. A heat-protected motor, standard overheating thermostat and a front airflow grill underline the high quality design of the TDS heating appliances.
There are four heat settings and output can be controlled via the integrated room thermostat. Ideal for stationary use, e.g. construction, agriculture, painting and decorating.

Technical Manual

Trotec HZE series heater units

The heater units are factory-fitted with a fuel pre-heater and a weather-protected heating oil filter.
They are driven by a separate ventilating oil burner and are suitable for situating outdoors.
A robust frame structure and cladding sheets made from non-rusting stainless steel ensure many years of unit operation.
The compact construction ensures simple, rapid and cost-effective assembly and ease of service.

• Single pipe system
  
• Brand name burner
  
• Service-friendly due to removable side panels
  
• Fuel pre-heating
  
• Built-in safety devices
  
• Fully automatic operation with room thermostat
  
• High quality, special radial fans

Technical Manual

Oil heating units

TROTEC IDS Series

Specially designed for the tough demands of rental use and offer professionals a multitude of possible building heating applications, such as the heating of tents, workshops, exhibition rooms, halls etc.
In addition to their high heating performance, the many practical features of these indirect oil heaters
them apart. The narrow construction enables them to negotiate even confined building site areas and narrow doors.

• Photocell flame monitoring
  
• Overheating thermostat
  
• and run-on ventilation
  
• Stainless steel combustion chamber
  
• Heat exchanger
  
• Double-coated metal housing
  
• Tank with fluid level indicator
  
• Housing remains safely cool
  
• Simple maintenance

Technical Manual

Luminous Heaters

supraSchwank by Schwank

The unique, ultra high efficiency supraSchwank 30 heater with an input of 88,500 Btuh has the same infrared output as a conventional radiant heater with 180,000 Btuh input.

The industry invariably uses the commonly accepted gas combustion efficiency to rate all its products. The supraSchwank leads the industry with a combustion efficiency of 96%. However, this figure does not relate to the effectiveness of a heater to convert gas input to infrared energy. Schwank rates its luminous heaters by measuring the actual infrared energy delivered to the working level.

The supraSchwank patented heater design converts 81%* of the gas input into infrared energy which heats the working level to the desired comfort temperature. The temperature at the ceiling will seldom exceed that at the occupancy level. By comparison, conventional heaters produce ceiling temperatures up to 120°F.

Technical Manual

Tube Heaters

STS-JZ Series by Schwank

The Schwank STS-JZ Infrared Tube Heater sets the standard for radiant tube heaters. To achieve high radiant efficiency and deliver heating cost savings of 35% to 50% versus conventional systems, the STS-JZ couples a patented ceramic burner head with a durable direct-drive blower located in line behind the burner. This system ensures a homogeneous gas-air mixture for optimum combustion efficiency and a long narrow flame – ideal tube firing and delivering more uniform heat down the length of the tube.

The heavy gauge steel tube has a special emissive coating that increases infrared radiant heat output and ensures high efficiency. The unique Schwank Focus Shield Reflectors mounted over the tube, trap and convert convection heat to infrared radiant heat (like the rays of the sun) and direct it to the floor and the people below.

Depending on burner input rating, the technology provides low intensity radiant heat over a variety of tube lengths and configurations.

Technical Manual

Patio Heaters

patioSchwank 2300

Discreet, efficient and comfort-driven, patioSchwank 2300 will heat up your profits as customers stay longer in the evening and later in the season. The patioSchwank 2300 is the perfect overhead solution to provide comfortable radiant heat to outdoor spaces where floor space is at a premium.

The stainless steel enclosure lens withstands the higher temperature and radiant output of the patioSchwank 2300. Other heaters with less radiant output use an aluminum grille that would be deformed by the radiant heat output of the patioSchwank 2300. Each fuel dollar delivers more heat and comfort to your patio.

The attractive shape of the patioSchwank 2300 appeals to residential patio application as well as the restaurateur.

Technical Manual

Gas Heaters

REMKO CLK Series

Versatile application possibilities for construction site heating

In case of sudden cold or undelayable, scheduled work, the heaters of the CLK series bring the necessary heat to wherever it is desired. This makes construction independent of the weather because construction on a deadline means that work may be performed during the cold season.
Structures, materials, and workstations must then be protected.

Ideal for heating workshops, exhibition rooms, and halls

The mobile devices must be in place only during the desired operating time to provide immediate heat when needed without a preheating time.

• Extremely low exhaust gas loses and thus higher combustion-technical efficiency and optimum efficiency
  
• Plug connection for control of room thermostat
  
• Fork lift support rails (optional)
  
• Closed combustion chamber housing

Technical Manual

Universal heaters

REMKO VRS Series

Fast heat, adapted to your needs

If economic heating in industrial halls and warehouses, sports centres and exhibition halls, or glass and plastic film greenhouses, these REMKO heaters are incomparable.

Whether they are supplied with EL heating oil, propane or natural gas, VRS heaters always generate heat as required: fast, safely, and economically.

In contrast to conventional hot water heating systems, these heaters function without a preheating time. In addition, the decentralised setup lowers mounting and investment costs in rooms to be heated.

The combustion-technical efficiency amounts to up to 93%.

• Space-saving installation with low mounting expenses
  
• Combustion chamber with stainless steel heat exchanger
  
• Individual equipment with air filters and shutter flaps on the air intake possible
  
• Connection possibility of air ducts
  
• Flexible application possibilities
  
• High quality and long service life
  
• Low-noise radial fans
  
• Easy accessibility of all components due to maintenance-free design

Technical Manual

Continuous combustion heater

REMKO ALLMAT

Solid fuels to lower energy costs

The REMKO slow-combustion heater can be used all year as an economic heat source to heat with dry wood, peat briquettes, or coal. The device is filled with fuel from the top and functions according to the low burning principle. In the process, the fuel automatically falls down the filling shaft when needed. Onl the fuel that has reached the combustion chamber under the filling shaft burns. Sophisticated technology from REMKO. The low-noise warm-air fan, which sends the air through the standard heat exchanger in a concentrated manner, works very effectively.

Chimney draft stabiliser made of stainless steel

The prerequisite for even heating operation is that the chimney draft stabiliser remains even and stable during all operating and weather conditions.
Changes in the exhaust gas temperature, various outside air temperatures, changing wind directions or downgusts general cause an increase or decrease in the chimney draft. An even chimney draft guarantees an effective removal of the flue gases and intake of the combustion air. Throug the chimney draft stabiliser, the possibly insufficient lifting force (chimney draft) is increased and stabilised.

• Well suited for long-term operation
  
• Optimum fuel use
  
• Precise heat dosing with automatic Bimatik warmth regulator
  
• Fast room heating by low-noise circulating-air fan

Technical Manual